Hackensack, NJ. January 26, 2010- As conformal coatings are becoming more essential to electronic assemblies, Master Bond broadens their protective conformal coatings line with the addition of UV10LV. A clear, highly non-conductive, UV curing conformal coating, it is designed to restrain the impact of moisture, dust, chemicals, and temperature extremes on electronic circuitry and components. Its high resilience bonds will not deteriorate even when exposed to adverse environmental conditions including severe...Read More
Hackensack, NJ. January 26, 2010- As conformal coatings are becoming more essential to electronic assemblies, Master Bond broadens their protective conformal coatings line with the addition of UV10LV. A clear, highly non-conductive, UV curing conformal coating, it is designed to restrain the impact of moisture, dust, chemicals, and temperature extremes on electronic circuitry and components. Its high resilience bonds will not deteriorate even when exposed to adverse environmental conditions including severe...Read More
Hackensack, NJ. January 26, 2010- As conformal coatings are becoming more essential to electronic assemblies, Master Bond broadens their protective conformal coatings line with the addition of UV10LV. A clear, highly non-conductive, UV curing conformal coating, it is designed to restrain the impact of moisture, dust, chemicals, and temperature extremes on electronic circuitry and components. Its high resilience bonds will not deteriorate even when exposed to adverse environmental conditions including severe...Read More
Hackensack, NJ. January 14, 2010 -Comprised of an aramid fiber reinforced epoxy adhesive for high performance structural bonding, Master Bond’s EP30R features outstanding dimensional stability and enhanced impact resistance. This two part epoxy is formulated to cure at room temperature or more rapidly at elevated temperatures. Master Bond EP30R produces high strength bonds to metals, glass, ceramics, vulcanized rubbers and many plastics. The structural adhesive is recommended for use over the temperature ra...Read More
Author:
Rachel Ruchama
Hackensack, NJ. November 29, 2009 - Master Bond has released a high temperature epoxy for service above 500°F. EP125 is a toughened, two part epoxy designed to withstand exposure to boiling acids, alkalis, salts, fuels and most organic solvents. It develops durable bonds between metallic and nonmetallic surfaces. The heat resistant adhesive features excellent dimensional stability in addition to superior electrical insulating properties. Thermally stable bonds retain their pertinent physical profile and ...Read More
Author:
Rachel Ruchama
http://www.masterbond.com/produse/p...
Hackensack, NJ November 11, 2009 - Master Bond’s newly developed EP42HT 2ND2 has a paste like consistency and facilitates the adhesive’s application when bonding vertical surfaces. This no-run two part epoxy fully complies with the testing requirements for USP Class VI biocompatibility. EP42HT 2ND2 cures readily at ambient temperatures and exhibits superior thermal stability for service up to 450°F. It forms high strength bonds that are unaffected by sterilization processes such as radiation, ethylene oxide...Read More
Author:
Rachel Ruchama
Compound’s Working Life Beats Conventional Potting Epoxies
Hackensack, NJ. October 27, 2009-Master Bond’s newly developed EP29LP 1epoxy is an attractive potting compound for use in large potting and encapsulating applications. Presenting a gamut of significant potting properties, good compound flow, easy set up and convenient handling, it exhibits a remarkably low exotherm, maximum pot life and desired electrical insulative qualities. The very long working life at ambient temperatures exceeds 6 hours and...Read More
Hackensack, NJ. October 15, 2009 -Master Bond’s newly developed EP30LV-1 is a low viscosity, optically clear epoxy for general purpose bonding, coating, sealing and casting. Linear shrinkage after cure is an exceptionally low 0.0003 inches/in. Its dimensional stability and low shrinkage make it an ideal optical epoxy. Master Bond EP30LV-1 forms powerful bonds with both similar and dissimilar materials including metals, glass, ceramics, wood, vulcanized rubbers and many plastics. These high strength and rigi...Read More
Author:
James Brenner
http://www.masterbond.com/prodtype....
adhesive film called FL901AO. It is formulated to function as the preferential heat-transfer path between heat-generating components and heat sinks or other cooling devices. The 100% solid, B-stage adhesive-preform provides a high bond strength, no-mess solution to electronic assembly and other industrial bonding and sealing operations. An attractive characteristic of the FL901AO epoxy preform is its ability to cure quickly at quite moderate temperatures, e.g. 1 hour at 250°F (125°C) or 30-40 minutes at 300...Read More
Author:
James Brenner
http://www.masterbond.com/prodtype....
Hackensack, NJ, September 30, 2009 - Master Bond has introduced a thermal adhesive film called FL901AO. It is formulated to function as the preferential heat-transfer path between heat-generating components and heat sinks or other cooling devices. The 100% solid, B-stage adhesive-preform provides a high bond strength, no-mess solution to electronic assembly and other industrial bonding and sealing operations. An attractive characteristic of the FL901AO epoxy preform is its ability to cure quickly at quite m...Read More
Author:
James Brenner
Hackensack, NJ, September 6, 2009 — Moisture-curing silicone conformal coatings are ideally suited as protective coatings for sensitive board components in demanding environments. However, electronic manufacturers avoided the use of silicone coatings in electronic packaging due to their long cure schedule that did not allow rapid assembly. Master Bond has developed a rapid tack free, ready-to-use silicone conformal coating called Master Sil 773, formulated to provide excellent protection to electronic circ...Read More
Author:
James Brenner
http://www.masterbond.com/prodtype....
UV Cure Epoxy Adhesive Offers Durable Bonds
Hackensack, NJ. July 9, 2009- Master Bond adds a significant strength advantage to a new UV adhesive compound combining high strength bonds with the well established benefits of UV cure namely; high productivity, improved performance and environmental compliance. Master Bond UV10TK40 is a modified epoxy adhesive offering a unique tensile strength of 8300 psi and a shore D hardness greater than 75, forming high surface hardness. It cures tack free in the presenc...Read More
Author:
James Brenner
http://www.masterbond.com
Hackensack, NJ. June 28, 2009- Master Bond adds a significant strength advantage to a new UV adhesive compound combining high strength bonds with the well established benefits of UV cure namely; high productivity, improved performance and environmental compliance. Master Bond UV10TK40 is a modified epoxy adhesive offering a unique tensile strength of 8300 psi and a shore D hardness greater than 75, forming high surface hardness. It cures tack free in the presence of air and will gel rapidly upon UV light ex...Read More
Author:
James Brenner
http://www.masterbond.com
Master Bond, a worldwide adhesive manufacturer, announces the launch of two new technical support centers to provide improved technical assistance around the world, around the clock. With the increasing globalization and manufacturing going worldwide, Master Bond observed the need to provide multilingual customer support in the country of origin. Our new support centers for the European and Asian markets assures us a thorough understanding of the engineer’s requirements and eliminates sources of error.
...Read More
Author:
James Brenner
http://www.masterbond.com
Hackensack, NJ. May 18, 2009- Master Bond MB514 polyethylene adhesive etches away at the bonding challenges presented by non-polar and low energy polyolefin surfaces. Typically, a pretreatment stage, which may include flame treatment, etching or roughening, is required before being able to bond polyolefin substrates. Specially formulated to eliminate this time consuming stage, the MB514 polyolefin based hot melt is particularly suited for use on untreated surfaces of polyethylene, polypropylene and combinat...Read More
Author:
James Brenner
http://www.masterbond.com/lp/tabs/t...
Hackensack, NJ. April 30, 2009-Master Bond's new MS151 optical adhesive has been specially formulated for optimal optical bonding. It is a two-part silicone adhesive with silicone’s inherent temperature resistance and flexibility, a refractive index of 1.43 and superb optical clarity. Its low viscosity assures complete fill-in around complicated contours even in very complex configurations. These key factors recommend the use of the silicone adhesive for optical potting, casting and encapsulation.
Master...Read More
Author:
James Brenner
http://www.masterbond.com/lp/tabs/t...
Hackensack, NJ. March 26, 2009-Master Bond's array of metal adhesives sends mechanical fastening, welding and other thermal joining methods to the shadows of history. Adhesive bonding is effectively applied on dissimilar metal substrates with different melting points. It evenly distributes stress loads over a broad bonding line rather than a concentrated area, thereby reducing stress on joints. One of these advanced adhesive products is Master Bond's Supreme 10HT. It is a one part, heat resistant adhesive ...Read More
Author:
Evan Spero
http://www.masterbon.com
Hackensack, NJ. February 26, 2009-A uniquely formulated epoxy adhesive has come to the rescue in an extraordinarily difficult cryogenic wind tunnel model bonding application. The state of the art wind tunnel poses a difficult challenge to engineering thermoplastics, not only in terms of the low temperatures and vacuum conditions, but in terms of thermal, thermal cycling and mechanical shear stresses. Cooled to 113°K at a rate of 40°K per hour and then reheated over a 4 hour cycle, the model’s stainless,...Read More
Author:
James Brenner
http://www.masterbond.com/prodtype....
Hackensack, NJ. December 15, 2008-Master Bond UV10FL-1 is a unique UV cure adhesive formulated and manufactured by Master Bond Inc. Its exceptional high strength profile and its ability to cure in thick sections, propels UV10FL-1 over conventional UV curing adhesives. The bond strength is equal or exceeds those obtained from conventional room temperature curing epoxy compositions. It has a tensile strength of 2,850 psi, a tensile modulus of 154,000 psi. Yet it remains a flexible adhesive with elongation...Read More
Author:
James Brenner
http://www.masterbond.com/produse/p...
Hackensack, NJ. May 19, 2008-Master Bond Inc has developed a high temperature resistant epoxy resin system called EP121CL for service up to 260°C (500°F). The two component, optically clear, low viscosity epoxy resin system features high thermal stability, superior electrical insulation properties and outstanding dimensional stability for casting, sealing, potting, encapsulation and impregnation applications. Especially noteworthy are its mechanical properties of 12,100 psi in tensile strength, 17,200 psi i...Read More
Author:
James Brenner
http://www.masterbond.com/prodtype....
Low Viscosity Silicone Potting Compound Assures Complete Fill-In
Hackensack, NJ. March 12, 2008-Master Bond MasterSil 151 is a new two component, low viscosity silicone compound for high performance casting, potting and encapsulation introduced by Master Bond Inc. This formulation is designed to cure at room temperature or more rapidly at elevated temperatures. MasterSil 151 has superior electrical insulation properties, high tensile strength and superb optical clarity. It has a service operating t...Read More
Author:
James Brenner
http://www.masterbond.com
Hackensack, NJ. February 7, 2008-Master Bond has introduced EP44 a new two component epoxy adhesive with a fast "3 minute" set for high performance general purpose bonding. Master Bond Polymer Adhesive EP44 gels in about 3 minutes and cures within a few hours at ambient temperatures to develop a high bonding shear strength of more than 3150 psi. The bonding strength is relatively insensitive to cleaning procedures. EP44 Bonded parts can be safely handled within a half hour. It produces durable high stren...Read More
Author:
James Brenner
http://www.masterbond.com/tds/ep11h...
Hackensack, NJ. December 27, 2007-A one component epoxy resin system called EP11HT has been developed by Master Bond Inc for high temperature bonding applications up to 205°C (400°F). Master Bond Polymer System EP11HT is a heat curing, structural epoxy adhesive featuring high shear strength and easy handling. It is formulated to cure at elevated temperatures, e.g. 110 minutes at 120°C (250°F) or 75 minutes at 150°C (300°F). EP11HT attains tensile shear strengths in excess of 3,300 psi and forms rigid and ...Read More
Author:
James Brenner
http://www.masterbond.com
New nanosilica filled one component UV curable epoxy called UV22 has been introduced by Master Bond Inc. This compound has been developed for coating, sealing and encapsulation applications. It features superb abrasion resistance, excellent optical clarity, low shrinkage and high physical strength properties. UV22 cures rapidly at room temperature upon exposure to a UV light source and is not oxygen inhibited. It has a service operating temperature range of -60°F to 300°F (-50°C to150°C). Post curing t...Read More
Author:
James Brenner
http://www.masterbond.com
Master Bond EP30D-12 is a uniquely versatile two component elastomer featuring superior strength, toughness and unusually superior chemical resistance developed by Master Bond Inc., Hackensack, NJ. EP30D-12 combines the recognized advantageous performance characteristics of epoxy resins such as adhesive strength, and chemical resistance with those of the polyurethane’s; including toughness, abrasion resistance and flexibility. The outcome is a product with high physical strength properties, such as a 7...Read More
News